Quantitative analysis of riparian herbaceous community in Liaohe River Conservation Area and its tributaries北大核心CSCD

Research on community characteristics of riparian herbs is an important scientific basis of riparian vegetation rehabilitation. This study aimed to investigate the species diversity and quantitative characteristics of riparian herbs in Liaohe River Conservation Area and its tributaries. Herbaceous communities were investigated by sample line method. Group average clustering analysis and detrended correspondence analysis (DCA) were used to find the major environmental factors affecting the distribution pattern of riparian herbaceous communities. The result showed altogether 154 herbaceous species, belonging to 40 families and 96 genera. The riparian herbaceous species diversity was found to be correlated to river slope, sinuosity and stream order, being lower in rivers of mountain area than in rivers of plain area, and higher in tributaries than in Liaohe River Conservation Area. Clustering analysis classified the herbaceous communities into 23 types, being dominated by hygrophytes including communities of Echinochloa crusgalli, Oenanthe javanica, Polygonum hydropiper, Murdannia keisak, Artemisia selengensis, Scirpus triqueter, Heleocharis soloniensis, Pycreus sanguinolentus, Cyperus fuscus, Phragmites australis, Polygonum amphibium, Carex diandra + Artemisia selengensis and Carex diandra + Rorippa islandica. Correlation analysis between DCA ordination axes and environmental factors showed that the altitude, river slope, sinuosity and stream level were the major environmental factors affecting the distribution pattern of herbaceous communities in the riparian zone of Liaohe River Conservation Area and its tributaries. The results of CCA showed that the contribution ratio of stream level was the highest, followed by altitude and slope, with sinuosity the last. The results suggested that riparian herbaceous characteristics are affected by the comprehensive force of altitude, river slope, sinuosity and stream order, and that Calamagrostis epigeios, Triarrhena sacchariflora and Phragmites australis are suitable species for riparian vegetation rehabilitation.     

Interspecific and intraspecific identification of Dendrobium based on the psbAtrnH intergenic region sequences and the 5S rRNA gene spacer sequences北大核心CSCD

This research aimed to investigate the interspecific and intraspecific identification of Dendrobium by using the multi-locus method so as to provide a molecular basis for Dendrobium identification through the combination of chloroplast psbA-trnH intergenic region sequences and ribosome 5S rRNA gene spacer sequences. PCR direct sequencing was applied to detect the chloroplast psbA-trnH intergenic region sequences as well as the ribosome 5S rRNA gene spacer sequences of 12 Dendrobium species, while the psbA-trnH intergenic region sequences of Dendrobium denneanum dq-2 variety and dq- 5line were cloned and sequenced for single nucleotide polymorphism (SNP) analyzing. The sequences were analyzed by the software Sequencher4.14, Bioedit7.0, MEGA5.2 and Dansp5.0; the interspecific and intraspecific Kimara-2-Parameter(K2P) distances were also calculated. The phylogenetic tree (using Neighbor joining method) was constructed with Bulbophyllum odoratissimum and Bletilla striata as outgroup. The results showed an average length of chloroplast psbA-trnH gene sequences in Dendrobium as 742.3 bp, with 72 variable sites, including 33 information sites; the average length of the ribosome 5S rRNA gene spacer sequences in Dendrobium was 336.4 bp, with 213 variable sites including 139 information sites. Using psbAtrnH intergenic region sequences in combination with ribosome 5S rRNA gene spacer sequences can not only identify D. denneanum, D. hancockil, D. thysiflorum, D. devonianum, D. moniliforme, D. chrysotoxum, D. officinale, D. heterocarpum and D. nobile, but also differentiate D. officinale from different geographical populations, and distinguish the dq-2 variety and dq 5line with SNP in the multi locus of D. denneanum.     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

Fuelwood assessment at the micro-watershed level:a case study in Garhwal Himalaya,India

Biomass,as fuelwood,is one of the major sources of energy in rural areas,especially in the mountainous regions of the world.As the increasing human population exerts more pressure on the forest thereby inducing an adverse effect on the sustainability of the ecosystem,which consequently causes fuelwood crisis at a local level,this crisis is spatio-temporal in nature.Thus,the major objective of this study is to assess the sustainability of fuelwood at different probable scenarios at a micro watershed level.The present study was conducted in the Phakot watershed,the Tehri Garhwal district of central Himalaya in India,during 2006-2008.Based on the vegetation composition in the study area,the net primary productivity(NPP)value of the Oak forest,and mixed oak and sal forests,was used for the quantification of fuelwood availability in evergreen and deciduous forests,respectively.The fuelwood demand was calculated on the basis of seasonal fuelwood consumption values.Nine probable permutations for availability-demand scenarios assuming the existence of high(H),low(L)and average(A)conditions were analyzed for evaluating the stress.The available annual harvestable fuelwood in the watershed is in the minimum and maximum ranges of 2283.28 to 4066.00 tons,respectively,per year whereas it has a demand of 110.76 tons as the minimum to 3659 tons as the maximum annually.This shows that in the current availabilitydemand scenario,the watershed does not have fuelwood crisis in the present situation but needs to maintain the sustainability of the system.Based on our study,it is concluded that,globally,more spatio-temporal study is required to understand the issues at the local level.     

Distribution and persistence of carbaryl in some terrestrial and aquatic components of a forest environment

Abstract

An oil‐based formulation of carbaryl (1‐naphthyl N‐methyl‐carbamate) (Sevin‐2‐Oil) was applied twice by a fixed‐wing aircraft at a dosage rate of 280 g of A.I./ha/application to a coniferous forest near Allardville, New Brunswick. The highest concentrations of the chemical in fir foliage, litter and forest soil 1 h after application were respectively 4.20, 1.21 and 0.59 ppm (fresh weight). The residues dissipated rapidly and the DT50 values obtained from the depletion curves were 2.3 d for foliage and 1.5 d for litter and soil samples. Very low levels (<0.1 ppm) of carbaryl persisted in foliage and litter beyond the 10 d sampling period. The maximum residue level found in stream water was 0.314 ppm and more than 50% of it had dissipated within 1 h. Low but detectable levels (0.001 ppm) of the chemical persisted in water until the end of the 10 d sampling period. Sediment samples contained a maximum level of 0.04 ppm, which dissipated below the detection limit within 5 h. Brook trout and slimy sculpins captured in the stream 1 d after the spray contained on average about 0.04 ppm of carbaryl and none of it was found in 3 d postspray samples.     

Influence of sugarcane bagasse-derived biochar application on nitrate leaching in calcaric dark red soil

Application of biochar has been suggested to improve water- and fertilizer-retaining capacity of agricultural soil. The objective of this study was to evaluate the effects of bagasse charcoal (sugarcane [ L.] bagasse-derived biochar) on nitrate (NO) leaching from Shimajiri Maji soil, which has low water- and fertilizer-retaining capacity. The nitrate adsorption properties of bagasse charcoal formed at five pyrolysis temperatures (400-800° C) were investigated to select the most suitable bagasse charcoal for NO adsorption. Nitrate was able to adsorb onto the bagasse charcoal formed at pyrolysis temperatures of 700 to 800° C. Nitrate adsorption by bagasse charcoal (formed at 800° C) that passed through a 2-mm sieve was in a state of nonequilibrium even at 20 h after the addition of 20 mg N L KNO solution. Measurements suggested that the saturated and unsaturated hydraulic conductivity of bagasse charcoal (800° C)-amended soils are affected by changes in soil tortuosity and porosity and the presence of meso- and micropores in the bagasse charcoal, which did not contribute to soil water transfer. In NO leaching studies using bagasse charcoal (800° C)-amended soils with different charcoal contents (0-10% [w/w]), the maximum concentration of NO in effluents from bagasse charcoal-amended soil columns was approximately 5% less than that from a nonamended soil column because of NO adsorption by bagasse charcoal (800° C). We conclude that application of bagasse charcoal (800°C) to the soil will increase the residence time of NO in the root zone of crops and provide greater opportunity for crops to absorb NO.     

活性炭吸附和脱附-等离子体氧化净化有机废气的研究

根据滑动弧放电等离子体适于降解高浓度有机物废气的特性,结合活性炭吸附法,提出了吸附器的吸附浓缩和热脱附-等离子体氧化净化有机废气的方法。在活性炭吸附过程中,最初2 h内甲苯净化率达到100%,随着时间的增加净化率下降;在热脱附滑动弧放电等离子体净化过程中,甲苯降解效率最高为97.3%。将滑动弧放电等离子体反应器出口气相产物收集进行FT-IR检测,发现放电后有CO2、CO、H2O和NO2产生,并分析了甲苯的降解机理。     

Use of whole-body and subcellular Cu residues of Lumbriculus variegatus to predict waterborne Cu toxicity to both L. variegatus and Chironomus riparius in fresh water

We tested the use of whole-body and subcellular Cu residues (biologically-active (BAM) and inactive compartments (BIM)), of the oligochaete Lumbriculus variegatus to predict Cu toxicity in fresh water. The critical whole-body residue associated with 50% mortality (CBR₅₀) was constant (38.2-55.6 μg g⁻¹ fresh wt.) across water hardness (38-117 mg L⁻¹ as CaCO₃) and exposure times during the chronic exposure. The critical subcellular residue (CSR₅₀) in metal-rich granules (part of BIM) associated with 50% mortality was approximately 5 μg g⁻¹ fresh wt., indicating that Cu bioavailability is correlated with toxicity:subcellular residue is a better predictor of Cu toxicity than whole-body residue. There was a strong correlation between the whole-body residue of L. variegatus (biomonitor) and survival of Chironomus riparius (relatively sensitive species) in a hard water Cu co-exposure. The CBR₅₀ in L. variegatus for predicting mortality of C. riparius was 29.1-45.7 μg g⁻¹ fresh wt., which was consistent within the experimental period; therefore use of Cu residue in an accumulator species to predict bioavailability of Cu to a sensitive species is a promising approach.     

Estimation of economic costs of particulate air pollution from road transport in China

Valuation of health effects of air pollution is becoming a critical component of the performance of cost–benefit analysis of pollution control measures, which provides a basis for setting priorities for action. Beijing has focused on control of transport emission as vehicular emissions have recently become an important source of air pollution, particularly during Olympic games and Post-games. In this paper, we conducted an estimation of health effects and economic cost caused by road transport-related air pollution using an integrated assessment approach which utilizes air quality model, engineering, epidemiology, and economics. The results show that the total economic cost of health impacts due to air pollution contributed from transport in Beijing during 2004–2008 was 272, 297, 310, 323, 298 million US$ (mean value), respectively. The economic costs of road transport accounted for 0.52, 0.57, 0.60, 0.62, and 0.58% of annual Beijing GDP from 2004 to 2008. Average cost per vehicle and per ton of PM₁₀ emission from road transport can also be estimated as 106 US $/number and 3584 US $ t^?1, respectively. These findings illustrate that the impact of road transport contributed particulate air pollution on human health could be substantial in Beijing, whether in physical and economic terms. Therefore, some control measures to reduce transport emissions could lead to considerable economic benefit.